LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Probe GL, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel - Analog >> Testing >> Turbo Boost Gauge Testing >> Boost Sensor Output Check No. 1

Boost Sensor Output Check No. 1

  1. Using a voltmeter, check for 2-3 volts on Light Green/Yellow wire at boost valve sensor 4-pin connector. See IDENTIFYING BOOST SENSOR 4-PIN CONNECTOR illustration. Boost valve connector is located at turbo boost sensor, near center of firewall.
  2. Observe voltmeter reading. If voltmeter reads 2-3 volts, go to BOOST GAUGE SENSOR OUTPUT CHECK NO. 2. If voltmeter does not read 2-3 volts, go to BOOST SENSOR GROUND CHECK.
scientia non olet · About LEMON Manuals