LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Explorer 4D Utility, RWD, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Integral Power >> Testing >> Preparation

Steering System - Integral Power: Testing: Preparation

  1. With belt tension correct, disconnect power steering pump pressure hose. Keep hose end raised to prevent fluid loss. Connect pressure hose of gauge to power steering pump fitting. Connect other hose from valve side of tester to steering gear inlet.
  2. Open valve. Run engine until fluid reaches normal operating temperature of 165-175°F (74-79°C). Check fluid level. Add fluid as required.
scientia non olet · About LEMON Manuals