LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Explorer 2D Utility, 4WD, Automatic >> Repair and Diagnosis >> Steering >> Steering Gear >> Steering System - Integral Power >> Overhaul >> Control Valve Housing >> Disassembly

Control Valve Housing: Disassembly

  1. Using Puller Attachment (T58L-101-B) and Slide Hammer (T59L-100-B), remove dust seal from rear of valve housing. Discard seal. Remove snap ring from valve housing. See Fig 1 .
    Fig 1: Exploded View of Control Valve Housing
    G71425Courtesy of FORD MOTOR CO.
  2. Turn valve housing over. Insert Driver Handle (T65P-3524-A2) and Bearing/Seal Remover (T65-3524-A3). Tap bearing and seal out of housing. Discard seal. If damaged, remove inlet tube seats using Tube Seat Remover (T74P-3504-L).
scientia non olet · About LEMON Manuals