LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Explorer 2D Utility, 4WD, Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Adjustments >> Window Mechanism >> Front Door

Front Door

  1. Remove the door trim panel and water shield. See POWER DOOR LOCKS article.
  2. Lower glass approximately 2-3" (51-75mm) from full UP position.
  3. Loosen three guide assembly nut and washer assemblies.
  4. Push glass rearward, within the door glass run assembly, until it bottoms out within the door frame.
  5. Move window guide post rearward within retention slot in inner panel. Tighten three guide assembly nut and washer assemblies to specified torque. See TORQUE SPECIFICATIONS  .
  6. Cycle glass up and down to check position.
  7. Install watershield and trim panel.
scientia non olet · About LEMON Manuals