LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Bronco 4.9 Y, Standard, M5OD-R2 >> Repair and Diagnosis >> Steering >> Steering Column >> Adjustments >> Steering Column Alignment >> "E" Series

"E" Series

  1. Loosen bolts attaching steering column bracket to brake and clutch pedal support. Loosen steering column opening cover plate-to-dash panel bolts.
  2. Loosen steering column opening cover clamp bolt. Verify coupling pin to flange cut-out clearance is .160 (4.06 mm). See Fig 1 . If clearance is not to specification, loosen flange coupling nuts, and adjust.
  3. When adjustment is completed, tighten all nuts and bolts to specifications. See TORQUE SPECIFICATIONS  .
Fig 1: Aligning Steering Column ("E" Series)
G71378Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals