LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Bronco 4.9 Y, Standard, M5OD-R2 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System (Gasoline) >> Upper Intake Manifold & Throttle Body (3.0L) >> Installation

Upper Intake Manifold & Throttle Body (3.0L): Installation

Clean and oil manifold bolt threads. Install new manifold gasket. If injectors were removed, lubricate new injector "O" rings with a light oil. DO NOT use silicone grease. To complete installation, reverse removal procedure.

Fig 1: Upper Intake Manifold Tightening Sequence (3.0L)
G12527Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals