LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Bronco 4.9 Y, Standard, M5OD-R2 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System (Gasoline) >> Upper Intake Manifold & Throttle Body (2.3L) >> Removal

Upper Intake Manifold & Throttle Body (2.3L): Removal

  1. Remove throttle linkage shield. Disconnect throttle linkage, cruise control and kickdown cable. Unbolt accelerator cable and position aside. Disconnect wire connectors from throttle position sensor and air by-pass valve.
  2. Disconnect air intake hose from throttle body. Remove air intake and PCV hoses from throttle body. Disconnect water by-pass hose. Disconnect EGR tube by removing flange nut. Remove 5 upper intake manifold retaining bolts. Remove intake manifold and throttle body assembly.
scientia non olet · About LEMON Manuals