LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Bronco 4.9 Y, Standard, M5OD-R2 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System (Diesel) >> Fuel Pump (7.3L Diesel) >> Removal & Installation

Removal & Installation

  1. Loosen but DO NOT remove fuel lines and fuel pump retaining bolts. Fuel pump should be loose. If fuel pump is not loose, apply hand pressure to break gasket seal.
  2. Rotate engine until fuel pump is loose. Remove fuel lines and fuel pump retaining bolts. Remove fuel pump and gasket. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals