LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Tempo Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Anti-Lock Brake System) >> Pinpoint Tests >> Pinpoint Test MMR-4 >> Resistance Check

Resistance Check

WARNING: This page is about a different car, the 1990 Ford Probe and 1989 Ford Probe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off. Set VOM on 200 ohm scale. At ABS fail-safe relay, measure and record resistance between terminals "f" and "j". At ABS fail-safe relay, measure and record resistance between terminals "b" and "j". Resistances should be 50-90 ohms.
  2. If resistances are as specified, go to PINPOINT TEST MMR-5  . If resistances are not as specified, replace ABS fail-safe relay.
scientia non olet · About LEMON Manuals