Window Regulator: Installation
WARNING: This page is about a different car, the 1992 Mercury Topaz, 1992 Ford Tempo, 1991 Mercury Topaz, and 1991 Ford Tempo. However, it is still accessible from the selected car via links, so may be relevant.
Install window regulator through the access hole in the rear door and slide arm roller into glass bracket C-channel. Install four rivets using Heavy Duty Riveter (D80L-23200-A) or equivalent, or four 6mm-20 x 12.7mm (1/4-inch-20 x 1/2-inch) screw and washer assemblies and four 6mm (1/4-inch) nut and washer assemblies to secure manual regulator mounting plate to door inner panel. Cycle glass to check for smooth operation. Install watershield and door trim panel. See DOOR TRIM PANEL .