LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Tempo Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Servicing - A/T) >> Lubrication >> Checking Fluid Level

Checking Fluid Level

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 1986 Mercury Topaz, 1986 Mercury Sable, 1986 Mercury Marquis, 1986 Mercury Lynx, and 1986 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
  1. With transmission at normal operating temperature, place vehicle on level ground. Apply parking brake, and run engine at curb idle. Shift selector through all positions, ending in Park.
  2. With transmission at normal operating temperature, fluid level should be between "ADD" and "DON'T ADD" or "MAX" marks on dipstick. If transmission is at room temperature, fluid level should be between middle and top holes on dipstick.
  3. If fluid level is correct at room temperature, it will be between "ADD" and "DON'T ADD" or "MAX" marks on dipstick when normal operating temperature is reached. DO NOT  overfill. Check condition of fluid for contamination or burned smell. Fully reseat dipstick.
scientia non olet · About LEMON Manuals