LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Tempo Base >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments - 4-CYL >> Throttle Position Sensor (TPS) Adjustment >> Except Probe 2.2L

Except Probe 2.2L

  1. To adjust "Level C" type sensors, use EEC-IV Breakout Box (Rotunda T83L-50-EEC-IV). Connect digital voltmeter and set to 20-volt scale. Connect positive voltmeter lead to pin No. 47 and negative voltmeter lead to pin No. 46.
  2. Turn ignition on. Loosen TPS hold-down screws. Rotate TPS until voltmeter reading is 1.0 volt. Tighten hold-down screws. Move throttle to Wide Open Throttle (WOT) position. Voltmeter should read 1.0 volt at idle, at least 4.0 volts at WOT and then return to 1.0 volt at idle.
  3. If voltage is not as specified, perform EEC-IV QUICK TEST in G - TESTS W/ CODES article.
scientia non olet · About LEMON Manuals