LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Bronco II RWD, Standard, M5OD-R1 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System (Gasoline) >> Upper Intake Manifold & Throttle Body >> Removal (2.3L)

Removal (2.3L)

  1. Remove throttle linkage shield. Disconnect throttle linkage, cruise control and kickdown cable. Unbolt accelerator cable and position out of way. Disconnect wire connectors from throttle position sensor and air by-pass valve.
  2. Disconnect air intake hose from throttle body. Disconnect PCV hoses. Disconnect water by-pass hose. Disconnect EGR tube by removing flange nut. Remove 5 upper intake manifold retaining bolts. Remove intake manifold and throttle body assembly.
scientia non olet · About LEMON Manuals