LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Bronco II 4WD, Standard, M5OD-R1 >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Power Windows) >> On-Vehicle Service >> Window Mechanism Lubrication

Window Mechanism Lubrication

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1991 Ford RV Cutaway, 1991 Ford Pickup, 1991 Ford F-Super Duty, 1991 Ford Econoline, and 1991 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The door window mechanism should be properly lubricated to provide ease of operation. The window glass mechanism should be lubricated whenever the glass channel or window regulator is removed, or excessive effort is required to operate the windows. To lubricate a door window mechanism, apply an even coating of Multi-Purpose Grease, D7AZ-19584-AA (ESR-M1C159-A) or equivalent to the window regulator rollers, shafts and the entire length of the roller guides as illustrated by the shaded area, See Fig 1.

Fig 1: Locating Points For Lubrication
G00140816Courtesy of FORD MOTOR CO.