Tailgate Mounted Tailgate Window Switch
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1991 Ford RV Cutaway, 1991 Ford Pickup, 1991 Ford F-Super Duty, 1991 Ford Econoline, and 1991 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Testing of the tailgate-mounted window switch can be performed with the switch installed in the vehicle. Use a self-powered test lamp or an ohmmeter.
- With the switch in the neutral position, there should be continuity between terminals No. 1, 2 and 3. See Fig 1.
- With the key rotated clockwise (window up) there should be continuity between terminals No. 1 and 5 and 2 and 4. See Fig 1.
- With the key rotated counterclockwise (window down) there should be continuity between terminals No. 2 and 5 and 3 and 4. See Fig 1.
- If the switch does not test as stated, replace the switch. See DOOR TRIM PANEL (BRONCO & F-SERIES) under REMOVAL & INSTALLATION. (GRAPHIC).