LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Bronco II 4WD, Standard, M5OD-R1 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System (Gasoline) >> Fuel Injector >> Removal (2.3/3.0L)

Removal (2.3/3.0L)

  1. Remove fuel tank cap and pressure relief valve cap. Install EFI Pressure Gauge (T80L-9974-B) at pressure relief valve to depressurize fuel system.
  2. Disconnect wiring harness from each injector. Remove fuel supply manifold. See FUEL SUPPLY MANIFOLD ASSEMBLY. Remove injectors from fuel supply manifold by using a slight twisting/pulling motion.
scientia non olet · About LEMON Manuals