Test Results
- If voltmeter reading indicates more than 2.5 volts above battery voltage, stop engine, and connect jumper wire between regulator base and alternator frame. Repeat CHARGING SYSTEM TESTING.
- If voltage is less than 2.5 volts above battery voltage, check ground connections on alternator and regulator. Repeat test once repair is made.
- If overvoltage condition still exists, disconnect regulator wiring plug and repeat CHARGING SYSTEM TESTING. If condition is corrected, replace regulator and repeat test.
- If overvoltage still exists with regulator disconnected, repair wiring harness between alternator and regulator circuits "A" and "F". Connect regulator and repeat tests once repair is made.