LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1989 >> Probe GL, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Electronic Suspension >> Suspension - Programmed Ride Control >> PRC System Self-Diagnostics >> Pinpoint Test Q10 >> Module/Ride Selector Switch Continuity

Module/Ride Selector Switch Continuity

Disconnect PRC control module connector and PRC ride selector switch connector. Set VOM on 200-ohm scale. Measure resistance between Blue/Yellow wires at 2 connectors. If resistance is less than 5 ohms, proceed to PINPOINT TEST Q11 . If resistance is not less than 5 ohms, repair Blue/Yellow wire between control module and ride selector switch for opens as necessary.

scientia non olet · About LEMON Manuals