LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1989 >> Bronco II RWD, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustment >> Intermediate (Front) Or Overdrive Band >> Notes

Intermediate (Front) Or Overdrive Band: Notes

  1. Clean dirt from band adjusting screw area. Remove and discard band adjusting screw lock nut. Install new lock nut.
  2. Tighten adjusting screw to 120 INCH lbs. (14 N.m). See Figure. Back off screw exact number of turns. See INTERMEDIATE (FRONT) OR OVERDRIVE BAND ADJUSTMENT table. Hold adjusting screw in position and tighten new lock nut to 40 ft. lbs. (56 N.m).
INTERMEDIATE OR OVERDRIVE BAND ADJUSTMENT

Application Back Off Screw
A4LD 2 Turns
C-6 1 1/2 Turns
scientia non olet · About LEMON Manuals