LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1988 >> Bronco II 4WD, Standard, M5OD-R1 >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Adjustment >> Camber Adjustment

Camber Adjustment

NOTE: For camber adjustment, see Fig 1 and Fig 2 .
Fig 1: Camber Adjustment (2WD Vehicles) Remove nut on lower ball joint and remove sleeve, replace it with desired camber degree eccentric sleeve, and adjust to specifications.
G30111
Fig 2: Camber Eccentric Adjustment (4WD Vehicles)
G30093Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals