LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1988 >> Bronco II 4WD, Standard, M5OD-R1 >> Repair and Diagnosis >> Engine Performance >> System >> EEC-IV CEC System >> Quick Test >> Equipment Hook-Up >> Analog Volt/Ohmmeter (VOM)

Analog Volt/Ohmmeter (VOM)

  1. Turn ignition key to "OFF" position. Connect jumper wire from Self-Test Input (STI) pigtail to pin No. 2 (Signal Return) on SELF-TEST connector. Set VOM at 0-15V DC range and connect positive lead of VOM to positive battery terminal.
  2. Connect negative VOM lead to pin No. 4 (STO) on SELF-TEST connector. See Figure . Connect timing light. Go to KEY ON/ENGINE OFF (KOEO) SELF-TEST  .
scientia non olet · About LEMON Manuals