LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1988 >> Bronco 5.0 N, Standard, M5OD-R2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (4.9L EEC IV Testing) >> Testing >> Equipment Hook-Up

Equipment Hook-Up

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1984 Ford RV Cutaway, 1984 Ford Pickup, 1984 Ford Econoline, 1984 Ford Cutaway, and 1984 Ford Club Wagon. However, it is still accessible from the selected car via links, so may be relevant.

With ignition off, connect a timing light to engine. Connect a jumper wire from the Self-Test input to ground. Connect a DC voltmeter (0-20V range) to battery positive terminal and Self-Test output terminal No. 4. See Fig 1 .

Fig 1: Meter Hook-Up for Reading Codes This applies to all models.
G9334
scientia non olet · About LEMON Manuals