LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1987 >> Aerostar Van Passenger, Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Testing >> Single Switch >> Aerostar

Single Switch: Aerostar

  1. With switch in the released (neutral) position, continuity should exist between terminals No. 1 and 3, 2 and 5, and between terminals No. 4 and 6. See Fig 1 .
  2. With switch pushed downward, continuity should exist between terminals No. 2, 4 and 5, and between terminals No. 1 and 3. Terminal No. 6 should be disconnected from all other terminals.
  3. With switch pushed upward, there should be continuity between terminals No. 2, 3 and 5, and between terminals No. 4 and 6. Terminal No. 1 should be disconnected from all other terminals. If switch does not operate as specified, replace switch.
Fig 1: Single Switch Pin Locations
G17086Courtesy of FORD MOTOR CO.