Single Window Switch (All Other Models)
- With switch removed from vehicle, test with a self-powered test lamp or an ohmmeter. With switch in "NEUTRAL" position, there should be continuity between terminals No. 1 and No. 3, No. 2 and No. 5, and No. 4 and No. 6.
- With the switch pushed downward, there should be continuity between terminals No. 2, No. 4 and No. 5, and No. 1 and No. 3. Terminal No. 6 should be disconnected from any other terminal.
- With switch pushed upward, there should be continuity between terminals No. 2, No. 3 and No. 5, and No. 4 and No. 6. Terminal No. 1 should be disconnected from any other terminal. If switch does not test as stated, replace switch.