LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1985 >> Mustang GT, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - DURA-Spark II >> Testing >> Ignition Coil Primary Resistance Check

Ignition Coil Primary Resistance Check

  1. Disconnect ignition coil connector. Connect ohmmeter leads to "BATT" and "TACH" terminals of ignition coil. Measure resistance and reconnect ignition coil connector.
  2. If resistance is .8-1.6 ohms, coil is okay. Proceed to Primary Circuit Continuity Check. If resistance is less than .8 or greater than 1.6 ohms, replace coil.
scientia non olet · About LEMON Manuals