| In-Line4 | | 1.6 | 1.2 | B |
| Additional Procedure: TIMING BELT: Remove & Replace: |
| In-Line4, If necessary to R&I Pulley add | | 0.8 | | B |
| Combination Procedure: BALANCE SHAFT SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: BALANCE SHAFT SPROCKET: Remove & Replace: |
| | 0.1 | | B |
| Combination Procedure: CAMSHAFT SEAL: Remove & Replace: |
| Each | | 0.2 | | B |
| Combination Procedure: CAMSHAFT SPROCKET: Remove & Replace: |
| Each | | 0.1 | | B |
| Combination Procedure: CRANKSHAFT OIL SEAL: Remove & Replace: |
| Front | | 0.3 | | B |
| Combination Procedure: CRANKSHAFT SPROCKET: Remove & Replace: |
| | 0.2 | | B |