4WD Models
- The turning angle stop screws are located on back side of steering knuckle, just above axle shaft centerline. To adjust, loosen stop screw lock nut.
- Using full-floating turn table under each wheel, adjust turning angle by adjusting stop screw IN to increase and OUT to decrease turning angle.
TURNING ANGLE ADJUSTMENT 4WD ONLY
| Application | Left Wheel | Right Wheel |
|---|---|---|
| Bronco & F150 | 36° | 36° |
| F250 | 33.4° | 33.4° |
| F350 | 30.3° | 30.3° |