LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1983 >> Bronco 5.0 F, Automatic >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows - Side >> Testing >> Single Switch

Single Switch

  1. With the switch in the neutral position, use an ohmmeter to test switch. Continuity should exist between terminals No. 1, 2, 3, and 5. Continuity should also exist between No. 4 and 6. See Figure.
  2. With switch pushed downward, continuity should exist between terminals No. 2, 4 and 5. Continuity should also exist between No. 1 and 3. Terminal No. 6 should be disconnected from all other terminals.
  3. With switch pushed upward, there should be continuity between terminals No. 2, 3, and 5; also No. 4 and 6. Terminal No. 1 should be disconnected from all other terminals. If switch does not operate as indicated in any test, replace switch.
scientia non olet · About LEMON Manuals