Both Mirrors Do Not Function
- Remove left door inner trim panel. Unplug accessory feed wire (Black and Yellow with Red stripe), and check for voltage. Turn ignition switch to "ON" position on "E" models.
- If no voltage is observed, remove instrument panel on "E" models or instrument panel pad on "F" models. Check hot wire, in-line fuse, and ground connections. Repair as necessary. If voltage is present at accessory feed wire plug, reconnect wire and check mirror functions.
- If satisfactory, install trim panel. If no voltage is observed, disconnect and check continuity of wiring, step-by-step, from hot wire lead to cowl/door harness connection, to switch wire feed connection, and to mirror feed wire connection. Replace or repair damaged wiring.