LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1977 >> Bronco Standard Trans, Trans Mfr CD 162T >> Repair and Diagnosis >> Steering >> Steering Linkage >> All Models >> Drag Link Replacement (F-250 4WD Only)

Drag Link Replacement (F-250 4WD Only)

  1. Replace drag link if ball studs are excessively loose or if drag link is bent. Do not attempt to straighten drag link.
  2. Remove cotter pins and nuts. Separate ball studs from mating parts. To install, reverse removal procedure. Tighten nuts and install cotter pins.
scientia non olet · About LEMON Manuals