LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1967 >> Falcon Base, 2.8L Eng, Not Available Trans >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Tune-Up - 6 CYL >> Model Identification >> Belt Adjustment >> Notes

Belt Adjustment: Notes

Tension with a strand tension gauge should be 110-140 lbs. (new belt), 60-90 lbs. (used belt). A used belt is one that has been operated 10 minutes or longer.

Series Code Designation

FALCON MODELS Code Nos.
Standard Sedan 01, 02
Futura 11, 12, 14
Station Wagon 22, 24
Ranchero 27
CAPACITIES

  170" 200" 240"
Crankcase (Qts.) (1) 3 1/2 3 1/2 5
Water (Qts.) (2) 8 1/2 8 1/2 12
Synchro-mesh      
  3-Speed (Pts.) 2 (3) 3.5
  4-Speed (Pts.) 4    
Overdrive (Pts.)     3.7
Auto. Trans. (4)      
  PCS (Qts.) 7 3/4 7 3/4
  PCV (Qts.)   10 1/2
  PCW (Qts.)   8 3/4
Rear Axle (Pts.)      
  Falcon, Mustang 2 1/2 2 1/2 2 1/2
  Fairlane 4 1/2 4 1/2 4 1/2
  All Others     4 1/2-5 1/2
Fuel Tank (5) (5) (5)
(1) Add one quart with filter change.
(2) Add one quart with heater.
(3) 2 pints for "HED" model, 3.5 pints for "HEF" model.
NOTE: Model identification is stamped on tag on right side of front of transmission case.

(4) Model identification is stamped on tag attached by low-reverse servo cover bolt.
(5) Ford passenger cars 25 gallons. Mustang and Falcon passenger cars 16 gallons. All others 20 gallons.
MUSTANG MODELS Code Nos.
Mustang 07, 08, 09
FAIRLANE MODELS Code Nos.
Fairlane 31, 32
Fairlane 500 41, 42, 43, 45
Fairlane 500 XL 46, 47
Fairlane 500 GT 40, 44
Station Wagon 38, 48, 49
GALAXIE & CUSTOM MODELS Code Nos.
Custom 53, 54
Custom 500 51, 52
Galaxie 500 62, 64, 65, 66
Galaxie 500XL 68, 69
Galaxie 7 Litre 61, 63
Galaxie 500 LTD 60, 67
Station Wagon 71, 72, 74, 76, 78