LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2023 >> 500X Pop >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Sensor, Accelerator Pedal Position >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the left front floor air outlet. Refer to OUTLET, AIR, REMOVAL AND INSTALLATION .
    GC0163367Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the accelerator pedal wire harness connector (1).
  4. Remove the screw (2a), push up to release and remove the accelerator pedal (2b) from the pedal support.
scientia non olet · About LEMON Manuals