LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2023 >> 500X Pop >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Sensor, Accelerator Pedal Position >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the accelerator pedal and securely tighten the screw.
  2. Connect the accelerator pedal wire harness connector.
  3. Install the left front floor air outlet. Refer to OUTLET, AIR, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals