LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2020 >> 500L Pop >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Vehicle Theft Security (Service Information)) >> Module, Intrusion >> Removal

Module, Intrusion: Removal

WARNING: This page is about a different car, the 2020 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
GC0158486Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the second row seating overhead lamp assembly from the headliner. Refer to LAMP, DOME, READING, REMOVAL .
  3. Reach through the headliner overhead lamp opening to access and disconnect the jumper wire harness and overhead wire harness electrical connectors from the Intrusion Transceiver Module (ITM) (2) connector receptacles (3).
  4. Slide the ITM past the snap feature (4) of the mounting bracket (1) on the headliner substrate.
  5. Remove the ITM through the headliner overhead lamp opening.
scientia non olet · About LEMON Manuals