Module, Compass: Installation
WARNING: This page is about a different car, the 2020 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
- Position the Remote Compass Module (RCM) (2) into the bracket on the upper side of the headliner (1).
- Install the RCM fasteners (4).
- Connect the electrical connector (3).
- Install the headliner assembly. Refer to HEADLINER, INSTALLATION .
- Connect the negative battery cable.
- Perform the Compass Variance Adjustment. Refer to MODULE, COMPASS, STANDARD PROCEDURE .
- Perform the Manual Compass Calibration. Refer to MODULE, COMPASS, STANDARD PROCEDURE .
- Verify proper compass operation.