Module, Telematics Gateway (TGM): Installation
WARNING: This page is about a different car, the 2020 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the antenna(s) (1), Hands Free Module (HFM) and UCI cables (4), video cable (3) and wiring connectors (2) to the Telematics Gateway Module (TGW).
- Position the TGW into the mounting location.
- Install the retainers (1) to the TGW.
- Install the switch bank assembly. Refer to POD, SWITCH BANK, INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.