Module, Integrated Center Stack Screen (ICSSM): Installation: Base
WARNING: This page is about a different car, the 2020 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
- Position the Integrated Center Stack (ICS) screen module into the instrument center bezel.
- Install the ICS module retainers (1).
- Connect the wire harness connectors (1 and 2) to the rear of the ICS screen module (3).
- Carefully connect the 40-way connector.
- Install the instrument panel center bezel (1). Refer to BEZEL, INSTRUMENT PANEL, CENTER, INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.