LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2020 >> 124 Spider Classica, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Electronic Control Modules (Service Information)) >> Module, Drivetrain Control (DTCM) >> Installation

Module, Drivetrain Control (DTCM): Installation

WARNING: This page is about a different car, the 2020 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
GC0173987Courtesy of CHRYSLER GROUP, LLC
  1. Install the Drive Train Control Module (DTCM) (3) in the vehicle
  2. Install the DTCM fasteners (2) and tighten to the proper (Torque Specifications).
  3. Install the wire harness connector (1).
  4. Install the lower front close out panel.
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals