LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2019 >> 500X Trekking Plus >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection >> Throttle Body >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install a new gasket on the inlet manifold.
  2. Install the throttle body retaining screws and tighten to the proper specification. Refer to FUEL INJECTION, TECHNICAL SPECIFICATIONS .
  3. Connect the wire harness connector to the throttle body.
  4. Install the turbocharger to throttle body air outlet pipe. Refer to COOLER AND HOSES, CHARGE AIR, INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals