LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2019 >> 500X Pop >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Spark Plug >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the ignition coils. Refer to COIL, IGNITION, REMOVAL  .
    NOTE:

    Prior to loosening the spark plug, use compressed air to blow out any debris that might be in the spark plug tube.

    GC0208131Courtesy of CHRYSLER GROUP, LLC
  3. Using the appropriate socket, remove the spark plugs (1) from the cylinder head.
scientia non olet · About LEMON Manuals