Cable, Shift: Adjustments: Verification
- Place shift lever in gated PARK (P).
- Attempt to move vehicle by rocking back and forth on level ground. If vehicle does not move, attempt to start engine. If engine starts, the park position is correct.
- Set parking brake.
- Turn key to on/run and depress brake pedal. Place shift lever in NEUTRAL (N).
- Attempt to start engine. If engine starts in both NEUTRAL (N) or PARK (P), shift cable is adjusted properly. No adjustment is required.
- If engine does not start in either PARK (P) or NEUTRAL (N), perform adjustment procedure.