Engine Block
WARNING: This page is about a different car, the 2019 Fiat 500X. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK - TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Connecting Rod M8 Cap Bolts | 20 + 40° | 15 + 40° | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Bedplate M10 Bolts | (Step 1) 25 |
(Step 1) 18 |
- | Tighten in sequence. Refer to REASSEMBLY . |
| (Step 2) 30 + 40° |
(Step 2) 22 + 40° |
- | ||
| Bedplate M8 Bolts | (Step 1) 12 |
(Step 1) 9 |
- | |
| (Step 2) 25 |
(Step 2) 18 |
- | ||
| Oil Galley Plug M18 | 30 | 22 | - |