LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2019 >> 500L Lounge >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Electronic Control Modules (Service Information)) >> Module, Body Control (BCM) >> Removal And Installation >> Right Hand Drive >> Installation

Right Hand Drive: Installation

WARNING: This page is about a different car, the 2019 Fiat 500X. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the wire harness connectors to the back of the BCM.
  2. Install the BCM in position and engage the retainers to the bracket.
  3. Connect the wire harness connectors to the front of the BCM.
  4. Install the cowl trim panel. Refer to PANEL, COWL TRIM, INSTALLATION .
  5. Install the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, INSTALLATION .
  6. Connect the negative battery terminal.
  7. Perform BCM programming.
NOTE:

If this Electronic Control Unit (ECU) is being replaced with a new unit, a diagnostic scan tool MUST be used to determine if alignment of the PROXI configuration data into the new ECU is needed. If PROXI alignment is needed, follow the routine outlined in the diagnostic scan tool for PROXI Configuration Alignment under the BCM "Misc. Functions" menu.

scientia non olet · About LEMON Manuals