LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500X Lounge, FWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Sensor, TMAP-Intake Manifold >> Removal And Installation >> 1.4L >> Removal

Removal And Installation: 1.4L: Removal

  1. Remove the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
    GC0163793Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the wire harness connector from the manifold pressure and intake air temperature sensor (1).
  3. Remove the manifold pressure and intake air temperature sensor mounting fastener (2).
  4. Remove the manifold pressure and intake air temperature sensor (2).
scientia non olet · About LEMON Manuals