LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500L Trekking >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging (Service Information) >> Generator >> Removal >> 1.4L

Charging (Service Information): Generator: Removal: 1.4L

  1. Disconnect and isolate the negative battery cable.
    GC0170955Courtesy of CHRYSLER GROUP, LLC
  2. Loosen the top A/C compressor retaining bolt (1).
    GC0170945Courtesy of CHRYSLER GROUP, LLC
  3. Remove the upper generator retaining bolt.
  4. Remove or reposition the accessory drive belt.
  5. Remove the right side axle half shaft. Refer to REMOVAL .
  6. Remove the right side axle half shaft bearing support.
    GC0170957Courtesy of CHRYSLER GROUP, LLC
  7. Remove the AC line support retaining bolt (1). This will allow the A/C line to be repositioned when removing the generator from the engine compartment.
    GC0170950Courtesy of CHRYSLER GROUP, LLC
  8. Remove the lower A/C compressor retaining bolts (1).
  9. Disconnect the generator harness connections.
    GC0170954Courtesy of CHRYSLER GROUP, LLC
  10. Remove both lower generator retaining bolts.
  11. Turn the generator as needed to pull the generator past the A/C compressor and lower side A/C line in order to remove it from the vehicle.