Switch, Ignition: Installation
WARNING: This page is about a different car, the 2017 Fiat 500L. However, it is still accessible from the selected car via links, so may be relevant.
- Install the ignition switch.
- Tighten the special new bolts until the heads shear off.
- Connect the electrical connection for the ignition switch.
- Install the aerial antenna ring.
- Connect the aerial antenna electrical connector.
- Install the steering column trim. Refer to SHROUD, STEERING COLUMN, LOWER, INSTALLATION and SHROUD, STEERING COLUMN, UPPER, INSTALLATION .
- Connect the negative battery cable.