LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500L Lounge >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control >> Evaporative Emissions >> Sensor, Crankcase Pressure >> Removal

Sensor, Crankcase Pressure: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the engine cover (Refer to ENGINE/COVER, ENGINE/REMOVAL AND INSTALLATION ).
    GC0184229Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the crankcase pressure sensor wire harness connector (1).
  4. Loosen the clamp and disconnect the oil vapor intake hose (2).
  5. Open the clip and remove the crankcase pressure sensor.
scientia non olet · About LEMON Manuals