Sensor, Camshaft Position: Installation

Courtesy of CHRYSLER GROUP, LLC

1. The camshaft position (CMP) sensor O-ring (1) can be reused if not damaged.
2. Apply a small amount of engine oil to the sensor O-ring (1).

   Courtesy of CHRYSLER GROUP, LLC

3. Install the Camshaft Position (CMP) sensor (1). Tighten bolt (2) to 9 N.m (80 in. lbs.).

   Courtesy of CHRYSLER GROUP, LLC

4. Connect and lock the Camshaft Position (CMP) sensor wire harness connector (1).

   Courtesy of CHRYSLER GROUP, LLC

5. Install the oil separator housing (4) to the cylinder head cover with three bolts (2) tightened to 13 N.m (115 in. lbs.).
6. Connect the vent hose (3) to the cylinder head cover.
7. Connect the PCV hose (1) to the intake manifold.

   Courtesy of CHRYSLER GROUP, LLC

8. Install the air cleaner body (1).Refer to BODY, AIR CLEANER, INSTALLATION .
9. Install the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
10. The Cam/Crank Variation Relearn procedure must be performed using the scan tool anytime there has been a repair/replacement made to a powertrain system, for example: flywheel, valvetrain, camshaft and/or crankshaft sensors or components. Refer to STANDARD PROCEDURE .