LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 124 Spider Classica, Standard Trans >> Repair and Diagnosis >> Electrical >> Starter >> Starting (Service Information) >> Sensor, Neutral Position >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Disconnect the negative battery cable.
  2. Remove the parking brake lever. Refer to LEVER, PARKING BRAKE, REMOVAL AND INSTALLATION .
  3. Remove the floor console rear lining and trim. Refer to CONSOLE, FLOOR, REMOVAL AND INSTALLATION .
  4. Remove the transmission gear shifter. Refer to LEVER, SHIFT, REMOVAL AND INSTALLATION .
  5. Remove the propeller shaft. Refer to REMOVAL AND INSTALLATION .
  6. Remove the crossmember. Refer to CROSSMEMBER, FRONT REINFORCEMENT, REMOVAL AND INSTALLATIONCROSSMEMBER, FRONT SUSPENSION, REMOVAL AND INSTALLATIONCROSSMEMBER, PEDESTRIAN IMPACT, REMOVAL AND INSTALLATIONCROSSMEMBER, TRANSMISSION, REMOVAL AND INSTALLATIONCROSSMEMBER, UNDERBODY TUNNEL, REMOVAL AND INSTALLATION .
    GC0175706Courtesy of CHRYSLER GROUP, LLC
  7. Disconnect the wiring harness connector (1) from the neutral position sensor.
  8. Remove the neutral gear lever sensor (2).
scientia non olet · About LEMON Manuals