LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 124 Spider Classica, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Sensor, Knock >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Position the knock sensor and tighten the new bolt to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  2. Connect the knock sensor electrical connector.
  3. Install the air induction tube from throttle body to intercooler hose. Refer to COOLER AND HOSES, CHARGE AIR, REMOVAL AND INSTALLATION .
  4. Install the engine belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION .
  5. Install the right front wheel.
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals